Kia Rio: Accelerator Position Sensor (APS)

Installation

   • Install the component with the specified torques. • ...

Description

Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors in engine ...

See also:

ISG OFF Switch: Description
The ISG OFF switch on the crash pad lower panel can be used to deactivate the ISG function. ...

Radiator: Inspection
Radiator Cap Testing 1. Remove the radiator cap, wet its seal with engine coolant, then install it to pressure tester. 2. Apply ...

Starter: Installation
1. Install in the reverse order of removal. Starter installation bolt: 49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft) ...