Kia Rio: Removal
| 1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
| 2. |
Disconnect the engine coolant temperature sensor connector (A).
|
| 3. |
Supplement the engine coolant (Refer to “Cooling System” in EM
group).
|
Inspection
1.
Turn the ignition switch OFF.
2.
Remove the ECTS (Refer to "Removal").
3.
After immersing the ther ...
Installation
•
Install the component with the specified torques.
•
...
See also:
Power Door Lock Actuators Inspection
Front Door Lock Actuator and Switch
1.
Remove the front door trim.
(Refer to the Body group - Front door)
2.
Remove the front door l ...
Rear-camera display
The Rear-Camera Display will activate when the back-up light is ON with the ignition
switch ON and the shift lever in the R (Reverse) position.
This system is a supplemental system that displays ...
Oil Pump Unit (OPU) Installation
1.
Installation is the reverse of removal.
...
Copyright © www.kirmanual.com 2014-2024