Kia Rio: Foot Actuator (With Auto Defogging System) Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the glove box housing.
(Refer to BD group - “Crash pad”)
|
| 3. |
Remove the cluster ionizer.
(Refer to HA group - “Cluster Ionizer”)
|
| 4. |
Disconnect the connector (A) and then remove the foot actuator
(B) after loosening the mounting screws.
|
| 5. |
Install in the reverse order of removal.
|
Foot Actuator (With Auto Defogging System) Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the foot connector.
3.
Verify that the foot actuator operates to ...
Blower
...
See also:
SRS Control Module (SRSCM) Removal
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes before beginning ...
Voice recognition
Using Voice Recognition
Starting Voice Recognition
Shortly press the
key on the steering wheel.
Say a command
If prompt feedback is in [ON], then the system will say “Please say a comma ...
Display settings
Press the key
Select [Display] through
TUNE knob or
key
Select menu through
TUNE knob
Mode Pop up
[Mode Pop up] Changes
/
selection mode
During On state, press the or
key to d ...
Copyright © www.kirmanual.com 2014-2024