Kia Rio: Removal
| 1. |
Remove the cyliner head cover.
(Refer to Timing System)
|
| 2. |
Remove the timing chain cover.
(Refer to Timing System)
|
| 3. |
Remove the timing chain.
(Refer to Timing System)
|
| 4. |
Remove the exhaust oil control valve (OCV) adapter (A).
|
| 5. |
Remove the camshaft bearing caps (A) with the order below and
then detach the intake camshaft and exhaust camshaft.
|
| 6. |
Remove the intake CVVT assembly (A) and exhaust CVVT (B).
|
[CVVT System Mode]
(1) Low Speed / Low Load
(2) Part Load
(3) Low Speed / High Load
(4) High Speed / High Load
...
Inspection
Camshaft Assembly
1.
Inspect the cam height.
Using a micrometer, measure the cam height.
Cam height
Intake : 44.15mm (1.7382in ...
See also:
Troubleshooting
Problem Symptoms Table
Use the table below to help you find the cause of theproblem. The numbers
indicate the priority of the likecause of the problem. Check each part in order.
...
Multimedia Jack Removal
1.
Using a screwdriver or remover, remove the multimidia jack assembly.
...
Rear-camera display
The Rear-Camera Display will activate when the back-up light is ON with the ignition
switch ON and the shift lever in the R (Reverse) position.
This system is a supplemental system that displays ...
Copyright © www.kirmanual.com 2014-2024