Kia Rio: Water pump: Inspection
| 1. |
Check each part for cracks, damage or wear, and replace the coolant
pump assembly if necessary.
|
| 2. |
Check the bearing for damage, abnormal noise and sluggish rotation,
and replace the coolant pump assembly if necessary.
|
| 3. |
Check for coolant leakage. If coolant leaks from hole, the seal
is defective. Replace the coolant pump assembly and gasket.
|
Water pump: Removal and Installation
Water Pump
1.
Drain engine coolant.
System is under high pre ...
Water pump: Troubleshooting
Water Pump
Symptoms
Possible Causes
Remedy
Coolant leakage
•
From the bleed hole of the water pump
...
See also:
Component Replacement After Deployment
Before doing any SRS repairs, use the GDS Pro to check for DTCs.
Refer to the Diagnostic Trouble Code list for repairing ...
Operation
1.
Vehicle moving.
2.
The transmission lever position is D-range. The brake pedal is
released.
3.
The ...
Overhead Console Lamp Inspection
Remove the overhead console lamp assembly then check for continuity between
terminals. If the continuity is not as specified, replace the overhead console
lamp assembly.
...
Copyright © www.kirmanual.com 2014-2024