Kia Rio: Tightening Torques
| Item |
N.m |
kgf.m |
lb-ft |
| Ignition coil installation bolt |
9.8 ~ 11.8 |
1.0 ~ 1.2 |
7.2 ~ 8.7 |
| Spark plug installation |
14.7 ~ 24.5 |
1.5 ~ 2.5 |
10.9 ~ 18.1 |
| Condenser & Hanger bracket installation nut |
18.6 ~ 23.5 |
1.9 ~ 2.4 |
13.7 ~ 17.4 |
| Alternator installation bolt [12 mm (0.47 in.)] |
19.6 ~ 26.5 |
2.0 ~ 2.7 |
14.5 ~19.5 |
| Alternator installation bolt [14 mm (0.55 in.)] |
29.4 ~ 41.2 |
3.0 ~ 4.2 |
21.7 ~ 30.4 |
| Battery (+) terminal tightening nut |
7.8 ~ 9.8 |
0.8 ~ 1.0 |
5.2~ 8.7 |
| Battery (-) terminal l tightening nut [with battery sensor] |
3.9 ~ 5.9 |
0.4 ~ 0.6 |
2.9 ~ 4.3 |
| Battery (-) terminal tightening nut [without battery sensor] |
1.0 ~ 1.2 |
9.8 ~ 11.8 |
7.2 ~ 8.7 |
| Battery mounting bracket bolt |
9.8 ~ 11.8 |
1.0 ~ 1.2 |
7.2 ~ 8.7 |
| Battery tray installation bolt |
9.8 ~ 11.8 |
1.0 ~ 1.2 |
7.2 ~ 8.7 |
| Battery sensor cable installation bolt |
10.8 ~13.7 |
1.1 ~ 1.4 |
8.0 ~10.1 |
| Starter installation bolt |
49.0 ~ 63.7 |
5.0 ~ 6.5 |
36.2 ~ 47.0 |
Specification
Ignition System
Ignition Coil
Item
Specification
Primary Coil Resistance (Ω)
0.75 ± 15％ [20°C (68°F)]
Secondary Coil R ...
Special Service Tools
Tool (Number and name)
Illustration
Use
Alternator pulley remover wrench
(09373-27000)
Removal and installation of alternator pulley
...
See also:
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the variable intake solenoid valve connector ( ...
Audio Unit Installation
1.
Connect the audio unit connectors and cable.
2.
Install the audio unit.
3.
Install the crash pad center fas ...
Description
Back view camera will activate when the backup light is ON with the ignition
switch ON and the shift lever in the R position.
This system is a supplemental system that shows behind the vehic ...
Copyright © www.kirmanual.com 2014-2024