Kia Rio: Spark Plug: Specification - Ignition System - Engine Electrical System - Kia Rio UB 2012-2024 Service ManualKia Rio: Spark Plug: Specification

Item
Specification
Type
SILZKR6B10E
Gap
0.9 ~ 1.0 mm (0.0354 ~ 0.0394 in.)

Spark Plug: Description
A spark plug is a device for delivering electric current from an ignition system to the combustion chamber of a spark-ignition engine to ignite the compressed fuel/air mixture therein by mean ...

Spark Plug: Inspection
[On vehicle inspection] 1. Accelerate the engine to about 3,000 rpm 3 times or more. 2. Remove the spark plug. ...

See also:

Installation
1. Install in the reverse order of removal. 2. Adjust the alternator belt tension after installation. (Refer to Engine charging Sy ...

Side Airbag (SAB) Module Components
...

Anchor Pretensioner (APT) Description
Front seat belt anchor pretensioner operates as well as belt pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on front seat a ...

Copyright © www.kirmanual.com 2014-2024