Kia Rio Manuals

Kia Rio: Inspection - Brake Pedal - Brake System - Kia Rio UB 2012-2024 Service ManualKia Rio: Inspection

1.
Check the bushing for wear.
2.
Check the brake pedal for bending or twisting.
3.
Check the brake pedal return spring for damage.
4.
Check the stop lamp switch.
(1)
Connect a circuit tester to the connector of stop lamp switch, and check whether or not there is continuity when the plunger of the stop lamp switch is pushed in and when it is released.
(2)
The stop lamp switch is in good condition if there is no continuity when plunger (A) is pushed.
Removal
1. Turn ignition switch OFF. 2. Remove the crash pad lower panel. (Refer to the Body group - "Crash pad") ...

Installation
1. Installation is the reverse of removal.    • ...

See also:

Disassembly
   Identify MLA(Mechanical lash adjuster), valves, valve springs as they are removed so that each item can be reinstalled i ...

Fuel Filter Replacement
1. Remove the fuel pump (Refer to “Fuel Pump” in this group). 2. Disconnect the electric pump wiring connector (A) and the fuel sender conn ...

Description
Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors in engine ...

Categories


Copyright © www.kirmanual.com 2014-2024