Kia Rio: 4Door Front Body A
|
|
|
|
| Hood hinge mounting hole (Ø11) |
Fender apron upper member tooling hole (Ø6.6) |
Front shock absorber housing cover tooling hole (Ø7) |
|
|
|
|
| Front shock absorber housing cover tooling hole (Ø7) |
Roof panel front corner |
Front pillar outer panel corner |
Measurement Method
Projected Dimensions
1.
These are the dimensions measured when the measurement points
are projected into the reference plane, and are the reference dimensions ...
4Door Front Body B
Hood hinge mounting hole (Ø11)
Fender apron upper member tooling hole (Ø6.6)
Engine mounting hole (&O ...
See also:
Removal
1.
Remove the transaxle assembly.
(Refer to "Manual transaxle system" in MT group)
2.
Remove the clutch cover bolts. Be care ...
Troubleshooting
Ignition System
Symptom
Suspect Area
Remedy
Engine will not start or is hard to
start (Cranks OK)
Ignition lock switch
Inspect igni ...
Rear combination lamp Removal
Rear combination lamp (Inside)
[4 Door]
1.
Disconnect the negative (-) battery terminal.
2.
Remove the trunk trim.
(Ref ...
Copyright © www.kirmanual.com 2014-2024