1. |
After loosening the tail gate hinge (A) mounting bolt, adjust
the tail gate by moving it up or down, or right or left.
|
2. |
Adjust the tail gate height by turning the tail gate overslam
bumpers (B).
|
3. |
After loosening the tail gate striker (C) mounting bolts, adjust
the tail gate striker by moving it up or down, or right or left.
|
TJ Joint Inspection
1.
Check the spider assembly for roller rotation, wear or corrosion.
2.
Check the groove inside the joint case for wear or corrosion
...
Seat Belt Switch Inspection
1.
Remove the connector from the switch.
2.
Check for continuity between terminals.
Seat belt condition
Continu ...
Rear Seat Replacement
Rear Seat Assembly Replacement
1.
After loosening the mounting bolt, then remove the rear seat cushion
(A).
Tightening torque :
...