1. |
Remove the rear roof trim.
(Refer to the Body group - Roof trim).
|
2. |
Disconnect the antenna cable and the connector (A).
|
3. |
Remove the roof antenna(A) after removing a nut(B).
|
Operation Condition for the ISG function
1. Auto stop or Auto start condition
(If all of the below condition are satisfied)
Items
State
Remark
Driving conditions
ISG OFF Switch
...
Checking Cables And Wires
1.
Check the terminal for tightness.
2.
Check terminals and wires for corrosion from battery electrolyte,
etc.
3.
...
Inspection
Clutch Pedal Inspection
1.
Measure the clutch pedal height (from the face of the pedal pad
to the floorboard) and the clutch pedal clevis pin play (measured at
the ...