Kia Rio: 35R Clutch Control Solenoid Valve(35R/C_VFS) Description

35R clutch control solenoid valve(35R/C_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 35R clutch.

Line Pressure Control Solenoid Valve Removal

   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

35R Clutch Control Solenoid Valve(35R/C_VFS) Specifications

Direct control VFS[35R/C] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current value(mA ...

See also:

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the resonator and the air intake hose (Refer to “I ...

Tightening Torques
Engine Control System Item kgf.m N.m lb-ft ECM installation bolt 1.0 ~ 1.2 9.8 ~ 11.8 7.2 ~ 8.7 ECM bracket installation ...

Compressor Installation
1. Make sure of the length of compressor mounting bolts, and then tighten it with the specified tightening order. Tightening torque : ...