Kia Rio: 4Door Front Body A
|
|
|
|
| Hood hinge mounting hole (Ø11) |
Fender apron upper member tooling hole (Ø6.6) |
Front shock absorber housing cover tooling hole (Ø7) |
|
|
|
|
| Front shock absorber housing cover tooling hole (Ø7) |
Roof panel front corner |
Front pillar outer panel corner |
Measurement Method
Projected Dimensions
1.
These are the dimensions measured when the measurement points
are projected into the reference plane, and are the reference dimensions ...
4Door Front Body B
Hood hinge mounting hole (Ø11)
Fender apron upper member tooling hole (Ø6.6)
Engine mounting hole (&O ...
See also:
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the VIS valve connector.
3.
Measure resistance between VIS valve ...
Auto Light Sensor Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the photo & auto light sensor (A) from crash pad upper
side by using screw ( ...
Oil Pressure Switch: Inspection
1.
Check the continuity between the terminal and the body with an
ohmmeter. If there is no continuity, replace the oil pressure switch.
2.
...
Copyright © www.kirmanual.com 2014-2024