Kia Rio: 5Door Front Body B
|
|
|
|
| Hood hinge mounting hole (Ø11) |
Fender apron upper member tooling hole (Ø6.6) |
Engine mounting hole (Ø12) |
|
|
|
|
| Transaxle mounting hole (Ø12) |
Engine mounting hole (Ø15) |
Transaxle mounting hole (Ø15) |
|
|
|
|
| Front side member tooling hole (Ø9) |
Front side member tooling hole (Ø6.6) |
Front end module mounting hole (Ø9) |
|
|
||
| Front end module mounting hole (Ø9) |
5Door Front Body A
Hood hinge mounting hole (Ø11)
Fender apron upper member tooling hole (Ø6.6)
Front shock absorber hou ...
5Door Front Body C
Engine mounting hole (Ø12)
Transaxle mounting hole (Ø12)
Engine mounting hole (Ø15)
...
See also:
ISG OFF Switch: Inspection
1.
Remove the crash pad side switch assembly (A) from the switch
panel on the crach pad of the driver's side.
2.
Remove the ISG ...
Description
The Electronic Throttle Control (ETC) System consists of a throttle body
with an integrated control motor and throttle position sensor (TPS). Instead
of the traditional throttle cable, an Acc ...
Rear Shock Absorber Replacement
1.
Remove the rear wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Copyright © www.kirmanual.com 2014-2024