Kia Rio: Button Engine Start System
- Component Location
- Circuit Diagram (1)
- Circuit Diagram (2)
- Description
- Start/Stop Button Component
- Start/Stop Button Removal
- Start/Stop Button Installation
- Ignition Switch Assembly Inspection
- Ignition Switch Assembly Removal
- Ignition Switch Assembly Installation
Antenna Coil Installation
1.
Install the antenna coil.
2.
Connect the antenna coil connector.
3.
Install the crash pad lower panel.
...
Component Location
1. Start Stop Button(SSB)
2. FOB key
3. Smart key unit
4. Interior antenna 1
5. Interior antenna 2
6. Trunk antenna
7. Door handle & door antenna
8. Bumper ante ...
See also:
Inspection
Camshaft Assembly
1.
Inspect the cam height.
Using a micrometer, measure the cam height.
Cam height
Intake : 44.15mm (1.7382in ...
Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor ...
Positive Crankcase Ventilation (PCV) Valve: Removal
1.
Disconnect the vapor hose (A) after removing the fixing clip.
2.
Remove the PCV valve (B) after unfastening it.
...
Copyright © www.kirmanual.com 2014-2024