Kia Rio: Description - Battery - Charging System - Engine Electrical System - Kia Rio UB 2012-2025 Service ManualKia Rio: Description

1.
The MF(Maintenance Free) battery is, as the name implies, totally maintenance free and has no removable battery cell caps.
2.
The MF(Maintenance Free) battery does not require water replenishment for the repair.
3.
The battery is completely sealed, except for small vent holes in the cover.



     
After disconnecting then reconnecting the battery negative cable, reset some parts that require the reset procedures.
(Refer to Body Electrical System – "General Information")
[AGM Battery for ISG System]
AGM battery is used for especially heavy load on the vehicle network depending on equipment and requirements. AGM stands for Absorbent Glass Material Battery; that is absorbent glass fibre fleece. AGM batteries are fitted in models with electrical loads/consumers which have a high energy demand.
The constantly increasing energy demand of modern vehicle electrical systems calls for ever more powerful battery solutions.
The power consumption is considerable even when the vehicle is parked.
The somewhat higher price compared with a battery of similar size is fully balanced by the following benefits:
-
Significantly longer service life
-
Increased starting reliability at low temperatures
-
100 % freedom from maintenance
-
Low risk in event of an accident (reduced risk to the environment)

Specifications


Battery
...

Specifications
Battery [Non-ISG type] Item Specification Model type CMF45L-BCI Capacity [20HR/5HR] (AH) 45/36 Cold Cranking Amperage (A) ...

See also:

Removal
1. Drain the brake fluid through the bleed plug (A). 2. Remove the clutch release cylinder assembly (C) after removing the tube (B) ...

Tire and wheels
Tire care For proper maintenance, safety, and maximum fuel economy, you must always maintain recommended tire inflation pressures and stay within the load limits and weight distribution recommend ...

Hazard Lamp Switch Installation
1. Connect the connectors. 2. Install the hazard lamp switch. 3. Connect the negative (-) battery terminal. ...

Copyright © www.kirmanual.com 2014-2025