Kia Rio: Disaseembly
| 1. |
Loosen the screw(6ea) and remove the lower cover (A) from the
steering wheel body.
|
| 2. |
Disconnect the heated steering wheel unit connector (A) and remove
the heated steering wheel unit (B) and wiring (C) and then loosen the
screw(2ea).
|
| 3. |
Remove the remote control assembly (A) from the steering wheel
body.
|
| 4. |
Installation is the reverse of the removal.
|
Removal
1.
Disconnect the battery negative cable from the battery and then
wait for at least 30 seconds.
2.
Turn the steering wheel so that the fr ...
Heated Steering wheel Description
Heated pads to grip the steering grip makes the fever.
Heated control unit
Heated pad
Specifications
Item
Specification
Voltage
13.5 V
...
See also:
Accelerator Pedal Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Disconnect the accelerator position sensor connector (A). ...
Auto Defogging Sensor (FATC only) Inspection
1.
Press the MODE switch more then 4 times within 2 seconds while
pressing the OFF switch.
Display
Fail description
00 ...
OBD-II review
1. Overview
The California Air Resources Board (CARB) began regulation of On Board
Diagnostics (OBD) for vehicles sold in California beginning with the 1988 model
year. The first phase, O ...
Copyright © www.kirmanual.com 2014-2024