1. |
Disconnect the negative (-) battery terminal.
|
2. |
Disconnect the fog lamp connector (A).
|
3. |
Remove the fog lamp bulb (A) after turning in the counterclockwise
direction.
|
4. |
Remove the fog lamp assembly (A) with loosening 3 screws.
|
Seat Belt Switch Inspection
1.
Remove the connector from the switch.
2.
Check for continuity between terminals.
Seat belt condition
Continu ...
Passenger Airbag (PAB) Module Description
The passenger airbag (PAB) is installed inside the crash pad and protects
the front passenger in the event of a frontal crash. The SRSCM determines if
and when to deploy the PAB.
...
Curtain Airbag (CAB) Module Removal
1.
Disconnect the battery negative cable and wait for at least thirty
seconds before beginning work.
2.
Remove the roof trim.
(Ref ...