1. |
Install the head lamp leveling actuator by turning the adjusting
gear.
|
2. |
Install the head lamp assembly.
|
3. |
Adjust the head lamp in accordance with the head lamp aiming instructions.
|
Inspection
Lighting Switch Inspection
With the multifunction switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified, replace
the mul ...
Specification
Pressure [kPa (kgf/cm², in H2O)
Output Voltage (V)
-6.67 (-0.068, -26.8)
0.5
0
2.5
+6.67 (0.068, 26.8)
4.5
...
Installation
1.
Installation is the reverse of removal.
•
...