Kia Rio: Positive Crankcase Ventilation (PCV) Valve: Installation - Crankcase Emission Control System - Emission Control System - Kia Rio UB 2012-2025 Service ManualKia Rio: Positive Crankcase Ventilation (PCV) Valve: Installation

1.
Installation is reverse of removal.

PCV Valve installation:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

Positive Crankcase Ventilation (PCV) Valve: Inspection
1. Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger movement.    ...

Evaporative Emission Control System
...

See also:

Fuel Tank Installation
1. Installation is reverse of removal. Fuel tank band installation nut: 39.2 ~ 54.0 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft) ...

Rear Washer Switch Inspection
1. With the rear wiper & washer switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace t ...

Installation
1. Installation is the reverse of removal.    If the oil seal on the transaxle case side is da ...

Copyright © www.kirmanual.com 2014-2025