1. |
Disconnect the vapor hose (A) after removing the fixing clip.
|
2. |
Remove the PCV valve (B) after unfastening it.
|
Auto Light Sensor Installation
1.
Reconnect the auto light connector.
2.
Install the auto light sensor.
...
Signal Waveform
The three waveforms below are taken from the #1 and #4 injectors. The
top waveform is from the high side (feed side) of the #1 and #4 injectors, while
the middle waveform is from the low side ...
Function
Function
Description
Front Washer & Wiper
-
Settings: IGN2 On,
-
Acti ...