Kia Rio: Rear Suspension System

Sub Frame Replacement

1. Remove the front wheel & tire. Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Components Location

1. Torsion beam axle 2. Shock absorber 3. Coil spring assembly 4. Rear disc ...

See also:

Antenna Coil Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to the BD group - "Crash pad") ...

Roof Trim
Components [General Type] 1 . Roof trim 2 . Sunvisor 3 . Retainer 4 . Assist handle bracket assembly [Sunroof Type] 1 . Roof t ...

Installation
1. Install in the reverse order of removal. 2. Adjust the alternator belt tension after installation. (Refer to Engine charging Sy ...