Front Brake Pads |
1. |
Remove the brake hose mounting bracket bolt (A).
|
2. |
Loosen the guide rod bolt (B) and pivot the caliper (C) up out
of the way.
|
3. |
Replace pad shim (D), pad retainers (C) and brake pads (B) in
the caliper carrier (A).
|
Brake Booster Vacuum Pressure Sensor: Description
In order to ensure adequate brake power assistance in every situation,
the brake booster is equipped with a partial vacuum sensor. The brake booster
vacuum pressure sensor is located beside t ...
Alternator: Removal and installation
1.
Disconnect the battery negative terminal first, then the positive
terminal.
Tightening torque
(+) terminal :
7 ...
High Pressure Fuel Pump Installation
•
Be sure to check the low pressure fuel hose quick-connector
(A) is completely connecte ...