Kia Rio: Specifications
| Item |
Requirement |
Remark |
|
| Rated voltage |
DC 12V |
Shall activate normally in these range. |
|
| Operating voltage range |
DC 9 ~ 16V |
||
| Operating temperature range |
-30°C ~ +75°C (-22°F ~ +167°F) |
||
| Storage temperature range |
-40°C ~ +85°C (-40°F ~ +185°F) |
||
| Dark Current |
Keyless (with security indicator) |
5.5 ㎃ |
Measure when the state, all output loads are OFF and there are
no Input SW(including TX operation) changes, continues 2sec. |
| SMK (with security indicator) |
4.5 ㎃ |
||
| Non keyless |
3.0 ㎃ |
||
Components
...
See also:
Replacement
The injector combustion seal should be replaced new one to prevent leakage
after removing the injector.
1.
Remove the combustion seal (A) with a wire cutter.
...
Relay Box (Engine Compartment) Components
...
Heater Unit Components
1. Shower Duct (Left)
2. Heater Pipe Cover
3. Mode Control Actuator
4. Mode Control Actuator Bracket
5. Defog mode lever (FATC)
6. Mode Control Main Lever (MANUAL)
7. Vent ...
Copyright © www.kirmanual.com 2014-2024