1. |
Be sure there is no play in the fuse holders, and that the fuses
are held securely.
|
2. |
Are the fuse capacities for each circuit correct?
|
3. |
Are there any blown fuses?
If a fuse is to be replaced, be sure to use a new fuse of the
same capacity. Always determine why the fuse blew first and completely
eliminate the problem before installing a new fuse.
|
Components
1. Steering wheel
2. Steering column & EPS unit assembly
3. Universal joint assembly
4. Steering gear box
...
SS-A Solenoid Valve(ON/OFF) Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor ...
Antenna Inspection
Antenna Cable
1.
Remove the antenna jack from the audio unit and antenna.
2.
Check for continuity between the center poles of antenna cable. ...