Kia Rio: Power Door Lock Switch Installation - Power Door Locks - Body Electrical System - Kia Rio UB 2012-2025 Service ManualKia Rio: Power Door Lock Switch Installation

1.
Install the power window switch module.
2.
Install the door trim panel after reconnecting the relevant connectors

     
-
Make sure that the power window switch module connectors are plugged properly.
-
Check that the power window switch and door lock switch operate normally.
Power Door Lock Switch Removal
1. Disconnect the negative(-) battery terminal. 2. Remove the front door trim panel. (Refer to the BD group - "Front door") ...

Power Door Mirrors
...

See also:

Tire Wear
   • Using tires and wheel other than the recommended sizes could cause unusual handling ch ...

Troubleshooting
Trouble Symptom Probable cause Remedy Vehicle pulls to one side Scoring of driveshaft ball joint Replace Wear, rattle or scoring of wheel b ...

Removal
1. Remove the fuel pump. (Refer to Engine Control/Fuel System - “Fuel Pump”) 2. Remove the ORVR valve (A) after releasing hooks (B). ...

Copyright © www.kirmanual.com 2014-2025