Kia Rio: Component Location (3)

Component Location (2)

[4 Door] 1. Back up lamp 2. Turn signal lamp 3. Tail lamp/ Stop lamp 4. Tail lamp 5. Stop lamp 6. Side marker lamp 7. High mounted stop lamp 8. Lic ...

Head Lamps Component

1. Head lamp assembly lens & housing 2. Head lamp bulb (Low) 3. Head lamp bulb (High) 4. Dust cover 5. Turn signal lamp bulb 6. Socket ...

See also:

Side Impact Sensor (SIS) Installation
Pressure Side Impact Sensor 1. Install the new pressure side impact sensor with the screws (B) then connect the pressure side impact sensor connector (A). ...

Antenna Coil Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to the BD group - "Crash pad") ...

Blower Unit Replacement
1. Remove the heater & blower unit. (Refer to HA group - "Heater Unit") 2. Separate the blower unit from the heater unit a ...