Kia Rio: Room Lamp Installation
| Room Lamp |
| 1. |
Install the room lamp assembly after connecting the room lamp
connector.
|
| 2. |
Install the room lamp lens.
|
| 3. |
Connect the negative (-) battery terminal.
|
Vanity Lamp
| 1. |
Install the vanit lamp assembly after connecting the vanity lamp
connector.
|
| 2. |
Connect the negative (-) battery terminal.
|
Luggage Lamp
| 1. |
Install the luggage lamp assembly after connecting the connector.
|
| 2. |
Connect the negative (-) battery terminal.
|
Room Lamp Removal
Room Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove room lamp lens (B).
3.
Remove ...
See also:
ISG OFF Switch: Inspection
1.
Remove the crash pad side switch assembly (A) from the switch
panel on the crach pad of the driver's side.
2.
Remove the ISG ...
Intake Actuator Description
The intake actuator is located at the blower unit. It regulates the intake
door by signal from control unit. Pressing the intake selection switch will
shift between recirculation and fresh ai ...
Rain Sensor Removal
The rain sensor may not operate properly if contaminated. Protect
the rain sensor surface by not removing the cover unti ...
Copyright © www.kirmanual.com 2014-2024