Kia Rio: Overhead Console Lamp Circuit Diagram

Room Lamp Installation

Room Lamp 1. Install the room lamp assembly after connecting the room lamp connector. 2. Install the room lamp lens. ...

Overhead Console Lamp Inspection

Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the overhead console lamp assembly. ...

See also:

Component Location
1. Tailgate actuator & switch 2. Rear door switch 3. Body control module 4. Key warning switch 5. Front door switch 6. Front door lock actuator & switch 7. Rear do ...

Intake Actuator Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad. (Refer to BD group - "Crash Pad") ...

Front Lower Arm Replacement
1. Remove the front wheel & tire. Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...