Kia Rio: Overhead Console Lamp Installation
| 1. |
Install the overhead console lamp after connecting the sunroof
switch connector and lamp connector.
|
| 2. |
Install the lens after tightening 2 screws.
|
Overhead Console Lamp Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the overhead console lamp lens (B).
3.
After ...
License Lamp Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the license lamp lens by pushing the clip (A).
3.
...
See also:
Starter: Reassembly
1.
Reassemble in the reverse order of disassembly.
...
DC/DC Converter: Removal and Installation
1.
Disconnect the battery negative terminal.
Tightening torque
Without battery sensor :
7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ ...
SRS Control Module (SRSCM) Removal
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes before beginning ...
Copyright © www.kirmanual.com 2014-2024