Kia Rio: Auto Light Sensor Installation

Auto Light Sensor Removal

1. Disconnect the negative (-) battery terminal. 2. Remove the photo & auto light sensor (A) from crash pad upper side by using screw ( ...

Head lamp leveling Device

...

See also:

Parking Brake Adjustment
   • Re-setting of the parking brake is necessary after overhauling the caliper body, or if ...

Receiver-Drier Replacement
1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with L wrench (A). Tightening torq ...

Roll Over Valve (ROV): Repair procedures
Removal 1. Remove the fuel pump. (Refer to Engine Control/Fuel System - “Fuel Pump”) 2. Remove the roll over valve (A) after releasing ...