1. |
Remove the trunk trim in the trunk after removing the screws and
clips.
(Refer to the BD group - "Tailgate")
|
2. |
Remove the trunk garnish (A) after disconnecting the connector(B)
and removing the nuts.
|
35R Clutch Control Solenoid Valve(35R/C_VFS) Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor ...
Troubleshooting
Symptom
Possible cause
Remedy
Speedometer does not operate
Cluster fuse (10A) is blown
Check for short and replace fuse
Speedometer faulty
...
High Mounted stop lamp Installation
[4 Door]
1.
Install the high mounted stop lamp assembly.
2.
Install the package tray trim.
3.
Connect the n ...