Kia Rio: Specification
Air Conditioner
| Item |
Specification |
|
| Compressor |
Type |
DVE12 (Externally Controlled Variable Swash Plate Type) |
| Oil type & Capacity |
PAG OIL, 120±10 cc |
|
| Displacement |
122 cc/rev |
|
| Condenser |
Heat Rejection |
11,900 - 3% kcal/h |
| Expansion valve |
Type |
Block type |
| Refrigerant |
Type |
R-134a |
| Capacity |
470 ± 25 g (16.5 ± 0.88 oz.) |
|
Blower Unit
| Item |
Specification |
|
| Intake |
Control Type |
Actuator |
| Blower |
Type |
Sirocco |
| Speed Step |
FATC: Auto or 1~8 speed, MANUAL: 1~4 speed |
|
| Speed Control |
FATC: Power mosfet, MANUAL: Blower resistor |
|
| Air filter |
Type |
Particle filter |
Heater And Evaporator Unit
| Item |
Specification |
|
| Heater |
Type |
Pin & Tube type |
| Heating Capacity |
4,650 - 5% kcal/hr |
|
| Mode Control Type |
Actuator |
|
| Temperature Control Type |
Actuator |
|
| Evaporator |
Cooling Capacity |
4,500 - 5% kcal/hr |
| Temperature Control Type |
Evaporator temperature sensor |
|
| A/C ON/OFF |
ON: 0 ± 0.3°C (32.0 ± 0.5°F) OFF: -2.0 ± 0.3°C (28.4 ± 0.5°F) |
|
Tightening Torques
| Items |
N.m |
kgf.m |
lb-ft |
| Compressor |
19.6 ~ 33.3 |
2.0 ~ 3.4 |
14.5 ~ 24.6 |
| Condenser - Discharge hose |
4.9 ~ 5.9 |
0.5 ~ 0.6 |
3.6 ~ 4.3 |
| Condenser - Liquid tube |
|||
| Compressor - Discharge hose |
4.9 ~ 5.9 |
0.5 ~ 0.6 |
3.6 ~ 4.3 |
| Compressor - Suction hose |
|||
| Expansion valve - Evaporator |
11.8 ~ 14.7 |
1.2 ~ 1.5 |
8.7 ~ 10.9 |
Troubleshooting
Problem Symptoms Table
Before replacing or repairing air conditioning components, first determine
if the malfunction is due to the refrigerant charge, air flow or compressor.
Us ...
See also:
TPMS Receiver Description
1.
Mode
(1)
Virgin State
A.
The receiver as a sole part is shipped in this
state. ...
Front Impact Sensor (FIS) Components
...
Temperature Control Actuator Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the temperature control actuator connector.
3.
Verify that the t ...
Copyright © www.kirmanual.com 2014-2024