Kia Rio: Interior
| 1. Auto Defogging Sensor 2. Photo Sensor 3. Heater & A/C controller (MANUAL) 4. Heater & A/C controller (FATC) |
5. In-car Sensor 6. Heater & Blower Unit 7. Evaporator Temperature Sensor |
Component Location Index
Engine Room
1. Receiver Drier
2. Condenser
3. Ambient Temperature Sensor
4. Compressor
5. Discharge Hose
6. Suction & Liquid Tube Assembly
7. Service ...
Compressor Oil Specification
1.
The HFC-134a system requires synthetic compressor oil (PAG) whereas
the R-12 system requires mineral compressor oil. The two oils must never
be mixed.
...
See also:
Description
Due to the considerably more frequent occurrence of starting operations,
the electrical load that occurs often leads to voltage dips in the vehicle network.
In order to stabilize the power s ...
Side Impact Sensor (SIS) Installation
Pressure Side Impact Sensor
1.
Install the new pressure side impact sensor with the screws (B)
then connect the pressure side impact sensor connector (A).
...
5Door Side Body A
Front side member tooling hole (Ø12)
Fender apron upper member tooling hole (Ø12)
Front door upper hing ...
Copyright © www.kirmanual.com 2014-2025