1. Center Bolt 2. Hub Bolt 3. Hub Assembly 4. Snap Ring |
5. Pulley 6. Compressor Assembly 7. Electric Control Valve (ECV) |
Compressor Installation
1.
Make sure of the length of compressor mounting bolts, and then
tighten it with the specified tightening order.
Tightening torque :
...
Steering Column and Shaft Adjustment
After or before servicing the EPS system, perform the troubleshooting
and test procedure as follows. Compare the system condition with normal condition
in the table below and if abnormal symp ...
Air Outlet and Air Flow
The mode selection switch controls the direction of the air
flow through the ventilation
System
Air Flow
Symbol
Outlet
Description
...