Kia Rio: Lift And Support Points
|
When heavy rear components such as suspension, fuel tank, spare
tire, tailgate and trunk lid are to be removed, place additional weight
in the luggage area before hoisting. When substantial weight is removed
from the rear of the vehicle, the center of gravity may change and can
cause the vehicle to tip forward on the hoist.
|
| •
|
Since each tire/wheel assembly weights approximately 14kg
(30lbs), placing the front wheels in the luggage area can assist
with the weight distribution.
|
| •
|
Use the same support points to support the vehicle on
safety stands.
|
|
|
1. |
Place the lift blocks under the support points as shown in the
illustration.
|
|
2. |
Raise the hoist a few inches (centimeters) and rock the vehicle
to be sure it is firmly supported.
|
|
3. |
Raise the hoist to full height to inspect the lift points for
secure support.
|
Warning / Caution Label (Cont'd)
A.
Keep lighted cigarettes and all other flames or sparks away from the
battery.
B.
Wear eye protection when charg ...
If the vehicle needs to be towed, call a professional towing service.
Never tow vehicle with just a rope or chain. It is very dangerous.
...
See also:
Components Location
1. AVN (A/V & Navigation head unit)
2. Midrange speaker
3. Roof antenna (GPS Radio)
4. Front door speaker
5. Rear door speaker
6. Antenna feeder cable
7. Feeder ca ...
Starter: Circuit Diagram
...
Removal
Engine removal is not required for this procedure.
•
Use fender covers to avoid damaging pa ...
Battery Caution Label Description
Towing