Kia Rio: Cluster Ionizer (FATC only) Inspection
| 1. |
Press the MODE switch more then 4 times within 2 seconds while
pressing the OFF switch.
* For diagnostic procedure, refer to DTC guide.
|
Cluster Ionizer (FATC only) Description
The cluster ionizer helps to clean up odors in the vehicle or from the
air-conditioner system.
When the ignition switch ON, the inoizer runs a "CLEAN" mode and then
a "ION& ...
Cluster Ionizer (FATC only) Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box.
(Refer to BD group - "Crash Pad")
...
See also:
Brake Booster Vacuum Pressure Sensor: Inspection
1.
Check installation status of BBVPS and Vacuum hose or damage of
vacuum hose.
2.
Connect GDS to DLC (Data Link Cable).
...
Specification
HO2S [Bank 1/Sensor 1]
Item
Specification
Heater Resistance (Ω)
2.4 ~ 4.0 [20°C(68°F)]
HO2S [Bank 1/Sensor 2]
A/F Ratio (λ)
...
Description
Fuel Pressure Regulator Valve is installed on the high pressure fuel pump
and controls fuel flow flowing into the injectors in accordance with the ECM
signal calculated based on various engin ...
Copyright © www.kirmanual.com 2014-2024