Kia Rio: Cluster Ionizer (FATC only) Replacement

1.	Disconnect the negative (-) battery terminal.

2.	Remove the glove box. (Refer to BD group - "Crash Pad")

3.	Disconnect the connector (A) and then remove the cluster ionizer (B) after loosening the mounting screws.

4.	Install in the reverse order of removal.

Cluster Ionizer (FATC only) Inspection

1. Press the MODE switch more then 4 times within 2 seconds while pressing the OFF switch. Display Fail description 00 ...

Heater

...

See also:

Special driving conditions
Hazardous driving conditions When hazardous driving conditions are encountered such as water, snow, ice, mud, sand, or similar hazards, follow these suggestions: Drive cautiously and allow extr ...

Auto Light Sensor Installation
1. Reconnect the auto light connector. 2. Install the auto light sensor. ...

Wipers & Washers
A : Wiper speed control (front) HI – High wiper speed LO – Low wiper speed INT – Intermittent wipe AUTO– Automatic control wipe OFF – Off MIST – Single wipe B : Intermittent control ...

Categories

Copyright © www.kirmanual.com 2014-2025