Kia Rio: Blower Unit Components
| 1. Blower Motor 2. Blower Fan 3. Clamp 4. NVH Pad 5. Connection Case 6. Cluster Ionizer (FATC only) 7. Intake Case (Left) |
8. Intake Seal 9. NVH Pad 10. Intake Door 11. Climate Control Air Filter 12. Climate Control Air Filter Cover 13. Intake Case (Right) 14. Intake Actuator |
Blower Unit Replacement
1.
Remove the heater & blower unit.
(Refer to HA group - "Heater Unit")
2.
Separate the blower unit from the heater unit a ...
See also:
Mode Control Actuator Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the mode control actuator connector.
3.
Verify that the mode con ...
Catalytic Converter
Description
The catalytic converter of the gasoline engine is a three way catalyst.
It oxidizes carbon monoxide and hydrocarbons (HC), and separates oxygen from
the oxides of nitrogen (NOx). ...
TPMS Sensor Replacement
Repair tire after using the Tire Mobility
Kit (TMK)
When the TPMS warning lamp OFF
1.
Remove the TMK repaired tire, wheel and TPMS sensor.
(Refer to ...
Copyright © www.kirmanual.com 2014-2024