1. |
Connect the battery voltage and check the blower motor rotation.
|
2. |
If the blower motor does not operate well, substitute with a known-good
blower motor and check for proper operation.
|
3. |
Replace the blower motor if it is proved that there is a problem
with it.
|
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the crankshaft position sensor connector (A) ...
Components
1. Battery (Non-ISG Type)
2. Battery (ISG Type)
3. Battery tray
4. Battery insulation pad
5. Battery mounting bracket
...
Multimedia Jack Installation
1.
Install the multimedia jack.
2.
Connect the multimedia jack connector.
...