Kia Rio: Positive Crankcase Ventilation (PCV) Valve: Removal
| 1. |
Disconnect the vapor hose (A) after removing the fixing clip.
|
| 2. |
Remove the PCV valve (B) after unfastening it.
|
Positive Crankcase Ventilation (PCV) Valve: Inspection
1.
Insert a thin stick (A) into the PCV valve (B) from the threaded
side to check that the plunger movement.
...
See also:
Rear Wheel Speed Sensor Inspection
1.
Measure the output voltage between the terminal of the wheel speed
sensor and the body ground.
...
Circuit Diagram
...
Wheel Hub Nut Tightening Sequence
Tighten the hub nuts as follows.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Copyright © www.kirmanual.com 2014-2025