Kia Rio Manuals

Kia Rio: Specifications - Engine Control / Fuel System - Kia Rio UB 2012-2024 Service ManualKia Rio: Specifications

Fuel Delivery System
Items
 Specification
Fuel Tank
 Capacity
 43 lit. (11.4 U.S.gal., 45.4 U.S.qt., 37.8 Imp.qt.)
Fuel Filter
 Type
 Paper type
Fuel Pressure
 Low Pressure Fuel Line
 480 ~ 520 kPa (4.89 ~ 5.30 kgf/cm², 69.6 ~ 75.4 psi)
High Pressure Fuel Line
 2.0 ~ 15.0 MPa (20.4 ~ 153.0 kgf/cm², 290.1 ~ 2175.6 psi)
Fuel Pump
 Type
 Electrical, in-tank type
Driven by
 Electric motor
High Pressure Fuel Pump
 Type
 Mechanical type
Driven by
 Camshaft

Sensors
Manifold Absolute Pressure Sensor (MAPS)
▷ Type: Piezo-resistive pressure sensor type
▷ Specification
Pressure
[kPa (kgf/cm², psi)]
 Output Voltage (V)
20.0 (0.20, 2.9)
 0.79
46.7 (0.47, 6.77)
 1.84
101.3 (1.03, 14.7)
 4.0

Intake Air Temperature Sensor (IATS)
▷ Type: Thermistor type
▷ Specification
Temperature
 Resistance (kΩ)
°C
 °F
-40
 -40
 40.93 ~ 48.35
-20
 -4
 13.89 ~ 16.03
0
 32
 5.38 ~ 6.09
10
 50
 3.48 ~ 3.90
20
 68
 2.31 ~ 2.57
40
 104
 1.08 ~ 1.21
50
 122
 1.56 ~ 1.74
60
 140
 0.54 ~ 0.62
80
 176
 0.29 ~ 0.34

Engine Coolant Temperature Sensor (ECTS)
▷ Type: Thermistor type
▷ Specification
Temperature
 Resistance (kΩ)
°C
 °F
-40
 -40
 48.14
-20
 -4
 14.13 ~ 16.83
0
 32
 5.79
20
 68
 2.31 ~ 2.59
40
 104
 1.15
60
 140
 0.59
80
 176
 0.32

Throttle Position Sensor (TPS) [integrated into ETC module]
▷ Type: Hall IC Non-contact sensor type
▷ Specification
Throttle angle(°)
 Output Voltage (V)
TPS1
 TPS2
0
 0.5
 4.5
10
 0.96
 4.05
20
 1.41
 3.59
30
 1.87
 3.14
40
 2.32
 2.68
50
 2.78
 2.23
60
 3.23
 1.77
70
 3.69
 1.32
80
 4.14
 0.86
90
 4.6
 0.41
98
 4.65
 0.35
C.T (0)
 0.5
 4.5
W.O.T (86)
 4.41
 0.59

Crankshaft Position Sensor (CKPS)
▷ Type: Magnetic field sensitive Type
▷ Specification
Item
 Specification
Coil Resistance (Ω)
 774 ~ 946 [20°C (68°F)]

Camshaft Position Sensor (CMPS)
▷ Type: Hall effect type
Knock Sensor (KS)
▷ Type: Piezo-electricity type
▷ Specification
Item
 Specification
Capacitance (pF)
 950 ~ 1,350
Resistance(MΩ)
 4.87

Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 1]
▷ Type: Zirconia (ZrO2) [Linear] Type
▷ Specification
Item
 Specification
Heater Resistance (Ω)
 2.4 ~ 4.0 [20°C(69.8°F)]

Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 2]
▷ Type: Zirconia (ZrO2) [Binary] Type
▷ Specification
A/F Ratio (λ)
 Output Voltage(V)
RICH
 0.6 ~ 1.0
LEAN
 0 ~ 0.4

Item
 Specification
Heater Resistance (Ω)
 Approx. 9.0 [21°C(69.8°F)]

Rail Pressure Sensor (RPS)
▷ Type: Piezo-electricity type
▷ Specification


Accelerator Position Sensor (APS)
▷ Type: Variable resistor type
▷ Specification
Accelerator
Position
 Output Voltage (V)
APS1
 APS2
C.T
 0.7 ~ 0.8
 0.275 ~ 0.475
W.O.T
 3.8 ~ 4.4
 1.75 ~ 2.35

Fuel Tank Pressure Sensor (FTPS)
▷ Type: Piezo - Resistivity type
▷ Specification
Pressure
[kPa (kgf/cm², in H2O)
 Output Voltage (V)
-6.67 (-0.068, -26.8)
 0.5
0
 2.5
+6.67 (0.068, 26.8)
 4.5

Actuators
Injector
▷ Specification
Item
 Specification
Coil Resistance (Ω)
 1.5 [20°C(68°F)]

ETC Motor [integrated into ETC Module]
▷ Specification
Item
 Specification
Coil Resistance (Ω)
 0.3 ~ 100 [20°C(68°F)]

Purge Control Solenoid Valve (PCSV)
▷ Specification
Item
 Specification
Coil Resistance (Ω)
 22.0 ~ 26.0 [20°C(68°F)]

CVVT Oil Control Valve (OCV)
▷ Specification
Item
 Specification
Coil Resistance (Ω)
 6.9 ~ 7.9 [20°C(68°F)]

Variable Intake Solenoid (VIS) Valve
▷ Specification
Item
 Specification
Coil Resistance (Ω)
 30.0 ~ 35.0 [20°C(68°F)]

Fuel Pressure Regulator Valve
▷ Specification
Item
 Specification
Coil Resistance (Ω)
 0.5 [20°C(68°F)]

Ignition Coil
▷ Type: Stick type
▷ Specification
Item
 Specification
Primary Coil Resistance (Ω)
 0.75 ± 15％[20°C(68°F)]
Secendary Coil Resistance (kΩ)
 5.9 [20°C(68°F)]

Canister Close Valve (CCV)
▷ Specification
Item
 Specification
Coil Resistance (Ω)
 19.8 ~ 20.8 (20°C)

Engine Control / Fuel System
...

Service Standard
Item Specification Ignition Timing (°) BTDC 3 ± 10 Idle Speed (rpm) A/C OFF Neutral, N, P-range 630 ± 100 D-range ...

See also:

 Brake fluid
Checking the brake/clutch fluid level Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the r ...

Blower Motor Inspection
1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, substitute with a know ...

Special Service Tools
Tool (Number and Name) Illustration Use 09568-34000 Crossmember support Supporting of the crossmember 09568-34000 Ball joint ...

Categories


Copyright © www.kirmanual.com 2014-2024