Kia Rio: Fail-Safe Mode
| Item |
Fail-Safe |
|
| ETC Motor |
Throttle valve stuck at 7° |
|
| TPS |
TPS 1 fault |
ECM looks at TPS2 |
| TPS 2 fault |
ECM looks at TPS1 |
|
| TPS 1,2 fault |
Throttle valve stuck at 7° |
|
| APS |
APS 1 fault |
ECM looks at APS 2 |
| APS 2 fault |
ECM looks at APS 1 |
|
| APS 1,2 fault |
Engine idle state |
|
When throttle value is stuck at 7°, engine speed is limited at
below 1,500rpm and vehicle speed at maximum 40 ~ 50 km/h (25 ~ 31 mph)
|
See also:
Heater Unit Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Recover the refrigerant with a recovery/recycling/charging station.
3.
...
Removal
1.
Disconnect the battery negative cable, and wait for at least thirty
seconds before beginning work.
2.
Remove the seat belt after pushin ...
Wheel Hub Nut Tightening Sequence
Tighten the hub nuts as follows.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Copyright © www.kirmanual.com 2014-2024