Kia Rio: Circuit Diagram

Specification

Item Specification Coil Resistance (Ω) 19.8 ~ 20.8 [20°C(68°F) ...

Inspection

1. Turn the ignition switch OFF. 2. Disconnect the CCV connector. 3. Measure resistance between the CCV termina ...

See also:

5Door Front Body B
Hood hinge mounting hole (Ø11) Fender apron upper member tooling hole (Ø6.6) Engine mounting hole (&O ...

Hood Adjustment
Hood Adjustment 1. After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up or down, or right or left. 2. Adjus ...

Transmitter Code Registration (Using GDS)
1. Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS. 2. ...