Kia Rio: Components Location
| 1. Battery sensor 2. Brake Booster Vacuum Pressure Sensor (BBVPS) 3. AGM battery 4. DC/ DC Converter (LDC) 5. ISG OFF Switch 6. Alternator 7. Starter |
8. Brake switch 9. Door switch 10. Seat belt switch 11. Hood switch 12. Electric Oil Pump (EOP) 13. Oil Pump Unit (OPU) |
| 1. Battery sensor 3. AGM battery |
2. Brake Booster Vacuum Pressure Sensor (BBVPS) |
|
|
|
| 4. DC/ DC Converter (LDC) |
5. ISG OFF Switch |
|
|
|
| 6. Alternator |
7. Starter |
|
|
|
| 8. Brake switch |
9. Door switch |
|
|
|
| 10. Seat belt switch |
11. Hood switch |
|
|
|
| 12. Electric Oil Pump (EOP) |
13. Oil Pump Unit (OPU) |
|
|
|
Operation Condition for the ISG function
1. Auto stop or Auto start condition
(If all of the below condition are satisfied)
Items
State
Remark
Driving conditions
ISG OFF Switch
...
Battery Sensor: Description
Vehicles have many control units that use more electricity. These units
control their own system based on information from diverse sensors. It is important
to have a stable power supply as th ...
See also:
Installation
1.
Install in the reverse order of removal.
2.
Adjust the alternator belt tension after installation.
(Refer to Engine charging Sy ...
Seat Heater Switch Removal
1.
Disconnect the battery (-) terminal.
2.
Remove the console assembly.
(Refer to the BD group - "Console")
...
Door Switch Removal
1.
Remove the door switch (A) after loosening the bolt.
...
Copyright © www.kirmanual.com 2014-2024