Kia Rio: Brake Switch Installation

Brake Switch Removal

1. Turn ignition switch OFF. 2. Remove the crash pad lower panel. (Refer to the Body group-"crash pad") 3. ...

Door Switch Description

Via the seat belt/Door switch, the ISG function can detect that the driver has fastened the seat belt/door. If the driver has not fastened the seat belt/door, the ISG function reacts as follo ...

See also:

Ignition Coil: Installation
1. Install in the reverse order of removal. Ignition coil installation bolts: 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 Ib-ft) ...

Interior
1. Auto Defogging Sensor 2. Photo Sensor 3. Heater & A/C controller (MANUAL) 4. Heater & A/C controller (FATC) 5. In-car Sensor 6. Heater & Blower Unit 7. ...

Transaxle Control Module (TCM) Inspection
TCM Problem Inspection Procedure 1. TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis ground using the backside of TCM harness connector as TCM side c ...