1. |
Installation is reverse of removal.
|
Teaching Procedures
1.
Key Teaching Procedure
Key teaching must be done after replacing a defective ECM or when
providing additional keys to the vehicle owner.
The procedure st ...
Rear combination lamp Removal
Rear combination lamp (Inside)
[4 Door]
1.
Disconnect the negative (-) battery terminal.
2.
Remove the trunk trim.
(Ref ...
Inspection
Camshaft Assembly
1.
Inspect the cam height.
Using a micrometer, measure the cam height.
Cam height
Intake : 44.15mm (1.7382in ...