Kia Rio: Removal
| 1. |
Remove the transaxle assembly.
(Refer to "Manual transaxle system" in MT group)
|
| 2. |
Remove the clutch cover bolts. Be careful not to be bent ortwist
bolts. Loosen bolts in diagonal directions.
|
Components
1. Clutch release fork
2. Clutch cover assembly
3. Clutch disk assembly
4. Clutch release bearing
...
Inspection
1.
Inspect diaphragm spring wear which is in contact with a concentric
slave cylinder bearing.
2.
Check the clutch cover and disc surface f ...
See also:
5Door Rear Body
Side outer panel rear corner
Tail gate hinge mounting hole (Ø14)
Tail gate hinge mounting hole (Ø1 ...
Disassembly
Engine removal is required for this procedure. (Refer to Engine and transaxle
assembly removal in this group)
1.
M/T : Remove the fly wheel.
2.
...
Rear Coil Spring Replacement
1.
Remove the rear wheel & tire.
(Both RH side and LH side)
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb ...
Copyright © www.kirmanual.com 2014-2024