Kia Rio Manuals

Kia Rio: Special Service Tools - Manual Transaxle System - Kia Rio UB 2012-2025 Service ManualKia Rio: Special Service Tools

Tool
(Number and Name)
 Illustration
 Use
09200-38001,3N000 (Beam)
09200-1P100, 4X000 (Adapter)
09200-2S200 (Supporter)
Engine support assembly


Removal and installation of the transaxle.
Use assembling 09200-1P100, 4X000 (Adapter) and 09200-2S200 (Supporter) on 09200-38001, 3N000(Beam).
09200-3N000
Engine support fixture (Beam)


Removal and installation of the transaxle.
Use this adapter (SST No. : 09200-1P100, 4X000) with the supporter (SST No. : 09200-2S200).
※Permit operating with 09200-38001.
09200-1P100
Engine support fixture (Adapter)


Removal and installation of the transaxle.
Use this beam (SST No. : 09200-38001/09200-3N000) with the supporter (SST No. : 09200-2S200) and adapter (SST No. : 09200-4X000)
09200-4X000
Engine support fixture (Adapter)


Removal and installation of the transaxle.
Use this beam (SST No. : 09200-38001/3N000) with the supporter (SST No. : 09200-2S200) and adapter (SST No. : 09200-1P100)
09200-2S200
Engine support fixture
(Supporter)


Removal and installation of the transaxle.
Use this beam (SST No. : 09200-38001/09200-3N000) with the adapter (SST No. : 09200-1P100, 4X000)

※ Engine support fixture special tool assembly drawing


1. 09200-3N000(Main bar)
2. 09200-3N000(Sub bar)
3. 09200-3N000(Handle)
4. 09200-3N000(Stopper)
5. 09200-3N000(Bolt-1)
6. 09200-4X000 (Adapter)
7. 09200-1P100(Supporter)
8. 09200-2S200(Supporter)
9. 09200-3N000(Nut)
 10. 09200-3N000(Snap ring)
11. 09200-3N000(Sub fixture)
12. 09200-3N000(Stopper)
13. 09200-3N000(Nut)
14. 09200-2S100(Spacer)
15. 09200-1P100(Sub fixture)
16. 09200-1P100(Nut)
17. 09200-3N000(Pin)

Lubricants
Items Recommnend lubricant Quantity Transaxle gear oil SAE 75W/85 1.8 ~1.9L (0.48 ~0.50 U.S.gal., 1.90 ~ 2.0 U.S. qt., 1.58 ~ 1.67 lmp qt.) ...

Inspection
Manual Transaxle Oil Inspection 1. Park the vehicle on a level ground and stop the engine. 2. Retighten the oil filler plug (A ...

See also:

Inspection
1. Check for the following items visually. - Cracks or leakage of the canister - Loose connection, distortion, or damage of the vapor hose/tube A ...

Wheel Hub Nut Tightening Sequence
Tighten the hub nuts as follows. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)    ...

Inspection
Lighting Switch Inspection With the multifunction switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the mul ...

Categories


Copyright © www.kirmanual.com 2014-2025