Kia Rio: Clutch & Brake

The 6-spd automatic transaxle consists of an overdrive clutch (OD/C), a one-way clutch (OWC), a lower and reverse brake (LR/B), an underdrive brake (UD/B), a 26 brake (26/B), and a 35R clutch (35R/C). These clutches and brakes are operated by controlling the hydraulic pressure.

Valve Body Installation

1. Installation is the reverse of removal.    After replacement or reinstallation procedure of ...

Clutch & Brake Components Location

1. Overdrive clutch (OD/C) 2. One way clutch (OWC) 3. Low & Reverse brake (LR/B) 4. Underdrive brake (UD/B) 5. 26 brake(26/B) 6. 35R clutch (35R/C) 7. Damper c ...

See also:

Instrument Cluster Removal
1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or romover, remove the cluster fascia panel (A). ...

Cruise Control Switch: Installation
1. Install in the reverse order of removal. ...

Receiver-Drier Replacement
1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with L wrench (A). Tightening torq ...